The Earth-Rite II PLUS is the ideal solution for grounding and bonding a broad range of equipment at risk of igniting combustible gases and vapors. In combination with demonstrating the full range of Class I, Div. 1 approvals for all gas and liquid vapor groups, the Earth-Rite II PLUS ensures a continuously monitored 10 ohm, or less, connection is present between the grounded object and a designated true earth grounding point. This feature provides equipment specifiers with the ability to demonstrate compliance with the grounding and bonding recommendations of NFPA 77*, API RP 2003* and IEC 60079-32*. *NFPA 77, “Recommended Practice on Static Electricity.” *API RP 2003, “Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents.” *IEC 60079-32, “Explosive atmospheres: electrostatic hazards, guidance”.
Attention Grabbing LEDs
Three green LEDs continuously pulse informing operators that the object to be protected from static discharges is grounded. When the system is not in use, or when it detects the resistance in the static grounding path is higher than 10 ohms*, a red LED illuminates the indicator panel located inside the XP enclosure.
Continuous Ground Loop Monitoring
Monitors the resistance of the ground loop from the grounded object through ® to the site’s verified true earth grounding point. If the Earth-Rite PLUS detects that resistance in the ground loop is higher than 10 ohms*, it engages a pair of dry output contacts that can be interlocked with the product transfer system.
Two dry output contacts
The primary contact can be interlocked with electro-mechanical devices or PLC systems to shut down the flow of product. The secondary contact can interface with attention grabbing audible alarms or strobe lights to provide an extra layer of protection over the hazard.
Easy Installation
Simple “bolt-on” enclosures complemented by straightforward cabling and PCB system wiring requirements. Flexible hazardous location enclosure options and power supplies which can run off both 240 V / 110 V AC and 24 V / 12V DC.T